LH-201 Macroporus Strong Basic Type I Anion Exchange Resin

1. Brief Introduction:
The product is a type of anion exchange resin with the quaternary amidocyanogen [-N(CH3)3OH] on macroporous styrene-divinyl benzene copolymer which is used in preparation for purity water and high-purity water, for purification of condensed water, for wastewater treatment and heavy metal recovery.
LH-202 resin series include four types: LH-201 is a kind of commonly used products, LH-201 FC for double room and fluidized bed system, LH-201 SC for bunk bed system, LH-201 MB for mixed bed system, especially for high-speed mixed bed used for condensed water purification
2. Voluntary Standards:
GB/T16580-96 DL 519-2004 SH 2605.02-1997
3. Typical physical and chemical properties:

Index Designation Indices	LH-201	LH-204 FC	LH-201 SC		LH-201 MB
Appearance	Milky white to straw yellow opaque spheroidal particle
Ionic form as aelivered	Cl
Moisture Content ％	50-60
Total Exchange Capacity mmol/g	≥3.80
Strong radical capacity mmol/g	≥3.70
Total Exchange Capacity mmol/ml	≥1.15		≥1.10	1.15
Specific gravity g/ml	0.65-0.73
Bulk Density g/ml	1.05-1.10
Range granularity ％	(0.315-1.25mm)≥95	(0.45-1.25mm)≥95	(0.63-1.25mm)≥95		(0.4-0.90mm)≥95
Lower-limit Granularity %	＜0.315mm≤1.0	＜0.45mm≤1.0	＜0.63mm≤1.0		＞0.90mm≤1.0
Effective Size mm	0.40-0.70	≥0.50	≥0.63		0.50-0.80
Uniformity Coefficient	≤1.60		≤1.40
Spherical after affrition%	≥90

4. Reference Indices for Operation:
1) PHRange:1-14
2) Maximum operating temperature:
OH form≤60℃; Cl form≤80℃
3) Swelling%: (Cl→OH-)≤20
4) Operating capacity: 25℃≥400mmol/l(wet)
5) Bed depth: 1.0-3.0m
6) Regenerat: NaOH: 4-5%
7) Amount of regenerating solution:
HCl(4-5%) volume :resin volume=2~3:1
8) Flow rate of regenerating solution: 4-6m/h
9) Regenerating contact time : 30-60 minutes
10)Conventional well-flushing flow rate: 15-25m/h
11)Conventional well-flushing time: about 30minutes
12)Operating flow rate: l5-45m/h ,40~100m/h
5. Specification Corresponding to International One:
USA: Amberlite IRA-900
Germany: Lewatit Mp-500
Japan: Diaion PA308
6. Package: Woven bag lined with plastic bag; net weight 25kg

Order the product

< Back >

Previous: LH-207 strong basic type I anion Exchange Resin
Next: LH-202 Macroporous Strongly Basic Type Ii Anion Exchange Resin